mirror of
https://github.com/kata0510/Lily58.git
synced 2025-04-29 10:12:58 +00:00
56 lines
No EOL
2.6 KiB
Markdown
56 lines
No EOL
2.6 KiB
Markdown
# Lily58L
|
||
Lily58L is 6×4+4keys column-staggered split keyboard.
|
||
|
||
It is a modified version of the Lily58 Pro pcb from [kata0510](https://github.com/kata0510)
|
||
and has the the following additional features.
|
||
- one rotary encoder support on each side
|
||
- underglow with SK6812 Mini RGB led's (6 per side)
|
||
- per key RGB led with SK6812 Mini-E led (with legs, easy to solder)
|
||
|
||
**[Build-Guide](buildguide_en.md)**
|
||
|
||
**Hardware available at [keycapsss.com](https://keycapsss.com)**
|
||
|
||
|
||
|
||
|
||
|
||
# Parts
|
||
|
||
Part name | Quantity | Remarks | Photo |
|
||
| ------- | -------- | ------- | ----- |
|
||
| Lily58L PCB | 2 pcs ||
|
||
| Lily58L case | 1 set | 2 solid panels, 2 with holes for switches |
|
||
| [Pro Micro](https://keycapsss.com/keyboard-parts/parts/79/arduino-pro-micro-atmega32u4-controller), [Puchi-C](https://keycapsss.com/keyboard-parts/mcu-controller/141/puchi-c-pro-micro-replacement-with-usb-c-and-atmega32u4) or Elite-C | 2 pcs (a mix is possible) | Optionally, use [Mill-Max Single Row Socket Headers](https://keycapsss.com/keyboard-parts/parts/100/single-row-socket-headers-pins-mill-max-series-315), to make it hot-swappable. ||
|
||
| Key switch (MX) | 58 pcs | ||
|
||
| [Kailh switch socket](https://keycapsss.com/keyboard-parts/parts/49/kailh-hot-swap-pcb-sockets-10-pcs) | 58 pcs | ||
|
||
| Diodes 1N4148W (SMD) | 58 pcs |||
|
||
| TRRS jack | 2 pcs ||
|
||
| Tactile switch | 2 pcs | Reset switch ||
|
||
| TRRS cable | 1 cable | Must be a 4-pole cable ||
|
||
| Key caps | 58 pcs | 1.5U caps, can also be 1U ||
|
||
| Micro USB or USB-C cable | 1 pcs | Dependent what you use on the master half. ||
|
||
|
||
|
||
## Optionally:
|
||
|
||
Part name | Quantity | Remarks | Photo |
|
||
| ------- | -------- | ------- | ----- |
|
||
| [OLED module](https://keycapsss.com/keyboard-parts/parts/80/ssd1306-oled-lcd-display-0.91-inch-128x32-i2c-white) | 2 pcs | It is possible to use only one display ||
|
||
| SK6812 Mini | 12 pcs | RGB led's for underglow ||
|
||
| SK6812 Mini-E | 58 pcs |RGB led's for keycap backlight **(underglow led's must be soldered, because they are connected in series)** ||
|
||
|
||
## Firmware:
|
||
Clone/download the QMK firmware and execute the following in the [qmk_firmware](https://github.com/qmk/qmk_firmware) directory to write the default Lily58L keymap
|
||
|
||
make lily58/light:lily58l:avrdude
|
||
|
||
|
||
When **`Detecting USB port, reset your controller now...`** is displayed, press the reset button on the keyboard to start writing.
|
||
Each half of the keyboard must be programmed separately using this approach.
|
||
|
||
If you're using DFU bootloader (in case of the elite c), replace the 'avrdude' with 'dfu'
|
||
|
||
## Schematic:
|
||
|
||
[](img/Lily58L-schematic.png?raw=true) |