jakew/lily58
1
0
Fork 0
mirror of https://github.com/kata0510/Lily58.git synced 2025-04-29 10:12:58 +00:00
Code Activity

Merge pull request #1 from Gansgar/patch-1

Browse source 
Added section for rotary encoder
This commit is contained in:
Ben 2020-06-19 12:53:17 +02:00 committed by GitHub
commit 3d6fadcdf9
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 6 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
buildguide_en.md
View file

@ -105,6 +105,12 @@ The image shows a soldered MX socket.
![Kailh hot swap sockets]() ![Kailh hot swap sockets]()
## Solder the rotary encoder
Soldering the rotary encoder is as simple as any other component. Put the encoder from the front into the holes on the PCB, just below the screen, and solder it from the back.
**Tip** Depending on your case you should first try and bend the rotary encoder legs a bit before soldering it in. The legs can prevent your case from closing completly, as it will rest on the protruding legs. Bending the pins so that they are flush with the encoder helps here.
## Attach the OLED display ## Attach the OLED display
On the **front side** of the board, apply enough solder to bridge the four jumper terminals in the Pro Micro section. On the **front side** of the board, apply enough solder to bridge the four jumper terminals in the Pro Micro section.